klemet banshee Posted April 27, 2008 Report Share Posted April 27, 2008 alright heres my prob i have a 01 banshee all stock except fmfs and a boost boottle and tors removal kit its getting spark but it takes like 4 kicks to get it started every time does anyone knoe wat this could be? last time i rebuilt it was around christmass think i need another rebuild? Quote Link to comment Share on other sites More sharing options...
jonnyb Posted April 27, 2008 Report Share Posted April 27, 2008 Have you checked your compression? Quote Link to comment Share on other sites More sharing options...
Screaming Yellow Zonker Posted April 28, 2008 Report Share Posted April 28, 2008 I would jump up on the pilot jet. You could probably turn your air screws in 1/2 to 1 turn that will help with start up. Quote Link to comment Share on other sites More sharing options...
ABL Posted April 28, 2008 Report Share Posted April 28, 2008 check comp... Quote Link to comment Share on other sites More sharing options...
klemet banshee Posted April 29, 2008 Author Report Share Posted April 29, 2008 thanks alot guys this might sound dumb but wheres the air screw? Quote Link to comment Share on other sites More sharing options...
dajogejr Posted April 29, 2008 Report Share Posted April 29, 2008 Looking at the bike from the side, it's the brass flat screw near the bowl, just above, and where the boot or air filter meet the carb. You did change the jetting when you put pipes on, right? Quote Link to comment Share on other sites More sharing options...
klemet banshee Posted May 8, 2008 Author Report Share Posted May 8, 2008 i tuned the carbs and it runs real great now as for the topend im going to rering it and get my crank trued and welded also new seals all the way around complete motor rehaul!!!!! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.