mopar1rules Posted April 14, 2008 Report Posted April 14, 2008 i was looking at purchasing a set of vito reed spacers for my banshee. are they really worth the $40? do they improve the low end and midrange enough that it can be felt by the seat of the pants? how badly does it affect jetting? if it affects it, would it richen it or lean it? Quote
gumby6t9 Posted April 14, 2008 Report Posted April 14, 2008 The only thing reed spacers are good for are to make large carbs clear the clutch arm. Quote
Snopczynski Posted April 15, 2008 Report Posted April 15, 2008 Not true, they will also add mid-top power on a larger cc engine with a port job and stroker crank. Quote
mopar1rules Posted April 15, 2008 Author Report Posted April 15, 2008 Not true, they will also add mid-top power on a larger cc engine with a port job and stroker crank. so, it sounds like they are worth the $40 then...huh? Quote
Bansh-eman Posted April 15, 2008 Report Posted April 15, 2008 so, it sounds like they are worth the $40 then...huh? no, Jeff (Snop) did a dyno run on them and got .25 more hp with them. unless your running a monster your wasting your money Quote
Snopczynski Posted April 15, 2008 Report Posted April 15, 2008 no, Jeff (Snop) did a dyno run on them and got .25 more hp with them. unless your running a monster your wasting your money Ditto! Quote
Animalman294 Posted April 15, 2008 Report Posted April 15, 2008 I'm leanin' towards the carb clearance thing myself............... Quote
mopar1rules Posted April 15, 2008 Author Report Posted April 15, 2008 so, i guess i'll just save the money then. do they at least help out throttle response? Quote
dajogejr Posted April 15, 2008 Report Posted April 15, 2008 so, i guess i'll just save the money then. do they at least help out throttle response? Yes... .25 HP.... I think I could take a shit and get that much from weight reduction.... Quote
mopar1rules Posted April 15, 2008 Author Report Posted April 15, 2008 guys say that on larger cc engines then they would help. how big of an engine would i need to make them do something? mine is i think 362cc (.040" over). Quote
dajogejr Posted April 15, 2008 Report Posted April 15, 2008 Much bigger than a stock .040 over motor, and he said .25 HP. Sounds like you're stuck on buying them...go ahead. Quote
Snopczynski Posted April 15, 2008 Report Posted April 15, 2008 Is your motor a ported stroker? Probably not, so at 362cc you dont need to worry still. They make a difference on lets say 373cc and bigger with port work and a stroker. Thats the last time I am gonna say it. Quote
mopar1rules Posted April 16, 2008 Author Report Posted April 16, 2008 ok, i wont waste my money on them then. thanks guys for all the input and helping me save $40. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.