Clutch question

[Isaac_62]

Guys,

 

I just rebuilt everything. New clutch, 4 mil stoker, etc. My question is... when my bike idles high (my smaller pilot jets arnt here yet) and i know im idling high. When i put it in first gear and pull in the clutch again the bike still wants to go forward. I have new springs toomy clutch discs and i know everything is put together correctly. Is this due to my bike idling so high? will this go away once i get the correct jetting for idle. I rode it and got in to all gears but when i sit at idle it still moves forward if im in first. what you guys think?

 

Thanks,

[shanYE west]

Grooved clutch basket, worn pressure plate or inner hub or incorrect adjustment of the actuator arm. (push rod)

 

When you change the clutch dont forget to check the rest of the componets too.

[Screaming Yellow Zonker]

while it is running in neutral try pulling the clutch a few times to get the fluid on the plates and see if that helps. Have you check the adjustment lately? Do the arrows line up with the clutch pulled?

[Isaac_62]

How do you adjust the actuator arm. Basket had no grooves in it. hub is brand new. Pressure plate was in good shape. The clutch pulls nice all the way through. so i guess i need to adjust it. how is that done?