jonnyb Posted March 30, 2008 Report Share Posted March 30, 2008 When I have my shee in nuetrul and shift into first It jump forward a little bit. Just put a new cable on last year and did it before I did. Adjusted it the best I could but still does it. Any ideas? Quote Link to comment Share on other sites More sharing options...
RadarRacing Posted March 30, 2008 Report Share Posted March 30, 2008 A lot of bikes do it banshees are somewhat bad about it. Make sure your clutch lever and clutch adjustment is good. Check the lever/indicator on the cases under the left carb and make sure it lines up like it should. Quote Link to comment Share on other sites More sharing options...
dragbanshee Posted April 2, 2008 Report Share Posted April 2, 2008 When I have my shee in nuetrul and shift into first It jump forward a little bit. Just put a new cable on last year and did it before I did. Adjusted it the best I could but still does it. Any ideas? Also if you have an aftermarket lever depending on what brand / type will also cause this to happen. I put my stock lever on a different perch and it works great, before I could have bike in gear clutch pulled and rev it up and the bike would move alittle. I dont really understand why, but Iv never had much luck with aftermarket levers unless high dollar. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.