cato Posted March 25, 2008 Report Share Posted March 25, 2008 I just ordered a set of DMC 916's. I am 800ft above sea level, 50 degrees in winter and 90 degrees in summer. I run Amsoil 40:1. I am going to run a pro design adapter with foam filter. Where should I start my jetting? (pilot, main, needle) Thanks Quote Link to comment Share on other sites More sharing options...
cato Posted March 27, 2008 Author Report Share Posted March 27, 2008 I just ordered a set of DMC 916's. I am 800ft above sea level, 50 degrees in winter and 90 degrees in summer. I run Amsoil 40:1. I am going to run a pro design adapter with foam filter. Where should I start my jetting? (pilot, main, needle)Thanks Somebody has to have an idea!!! DMC said to run 30 pilots with 280 to 300 mains. That sounds a little rich. I was thinking of starting with stock pilots and 270 mains and needle in middle clip. Thanks Quote Link to comment Share on other sites More sharing options...
Michael Jackson Posted March 27, 2008 Report Share Posted March 27, 2008 always start on the rich side and move it down if needed,they will always tell you a little on the rich side for their sake. Quote Link to comment Share on other sites More sharing options...
ASRBanshee Posted March 27, 2008 Report Share Posted March 27, 2008 Maybe you should start off rich like 290 then move your way down. 30 pilots should be good. Surprised DMC helped you, I try to ask them about jetting and one of the guys had such a bad attitude and just told me to look at the site. Quote Link to comment Share on other sites More sharing options...
cato Posted March 27, 2008 Author Report Share Posted March 27, 2008 Maybe you should start off rich like 290 then move your way down. 30 pilots should be good. Surprised DMC helped you, I try to ask them about jetting and one of the guys had such a bad attitude and just told me to look at the site. He was shocked when I told him I bought a brand new set of DMC's LOL Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.