bklf7 Posted March 20, 2008 Report Posted March 20, 2008 (edited) I just bought a banshee that was in a box and finally got it back together. Well today I got it running but when I went to shut it off it wouldnt shut off with the kill switch. I found a broken wire in the kill switch so I fixed that but still will not shut off. There is no key switch on this bike either. This happens on a cold motor also. Does anybody have any ideas what it could be? Edited March 20, 2008 by bklf7 Quote
man27 Posted March 21, 2008 Report Posted March 21, 2008 I suggest buying a teather kill switch since you have no key anyway no one will steal your bike!!!! :thumbsup: Quote
bklf7 Posted March 21, 2008 Author Report Posted March 21, 2008 I suggest buying a teather kill switch since you have no key anyway no one will steal your bike!!!! :thumbsup: That would be what I would do but I am just getting this thing going so I can sell it. So if nobody has any ideas tonight I will be ou there trying to figure this out tommorrow. Quote
WALLACE84 Posted March 21, 2008 Report Posted March 21, 2008 Its hard to say what exactly it is but if you have a clymer, just start chasing wires and checking them to see if there is any other ones that are worn or cut or whatever..... Quote
bklf7 Posted March 21, 2008 Author Report Posted March 21, 2008 Its hard to say what exactly it is but if you have a clymer, just start chasing wires and checking them to see if there is any other ones that are worn or cut or whatever..... Yep thats my plan for tommorow Quote
Bansh-eman Posted March 21, 2008 Report Posted March 21, 2008 buy a CR250 kill switch and get rid of the big eye sore. kill two birds with one stone. then you can move the lights to a hidden location Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.