wooten Posted March 19, 2008 Report Posted March 19, 2008 i just installed some reed spacers between the jugs and reeds, and i think the bike is running a little lean but i dont know it starts fine, idles finel, and runs smooth but there is not mch smoke at all coming out of the pipe, is there anyway to richen it without installing new jets or did i put the spacers in the wrong location?? Quote
ClimbAnyHill Posted March 19, 2008 Report Posted March 19, 2008 And it was running fine before you installed the parts? If so you might have a leave around that intake area. Check it again. What mods and jetting you at now? Quote
wooten Posted March 22, 2008 Author Report Posted March 22, 2008 i mix 4 to 1 and it still runs fine through all gears and startup should i have put the spacers between the reeds and the intake Quote
Male Supremacy Posted March 27, 2008 Report Posted March 27, 2008 i mix 4 to 1 and it still runs fine through all gears and startup should i have put the spacers between the reeds and the intake 4 to 1??? Quote
wooten Posted March 30, 2008 Author Report Posted March 30, 2008 4 ounces to 1 gallon is that not right ?? Quote
2001Stroker Posted March 30, 2008 Report Posted March 30, 2008 4 ounces to 1 gallon is that not right ?? Click on this. http://www.rctek.com/pdf/fuel_to_oil_ratio_chart.pdf Quote
bansheejoel Posted March 30, 2008 Report Posted March 30, 2008 4 ounces to 1 gallon is that not right ?? thats correct, it would equal to be 16oz to 4 gallons which is 32:1 your fine Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.