T-daddy Posted March 17, 2008 Report Posted March 17, 2008 i tryed to take stator cover off but one of the screws is stripped how the hell can i get it out Quote
Screaming Yellow Zonker Posted March 17, 2008 Report Posted March 17, 2008 try a set of needle nose vise grips if that doesnt work than you will have to take a dremel tool and cut a slot and use a flat blade screwdriver. Quote
T-daddy Posted March 17, 2008 Author Report Posted March 17, 2008 try a set of needle nose vise grips if that doesnt work than you will have to take a dremel tool and cut a slot and use a flat blade screwdriver. i tried all sorts of pliers and vice grips even tried extractor but didnt try cutting a slot any other ideas Quote
skeletor15 Posted March 17, 2008 Report Posted March 17, 2008 i tried all sorts of pliers and vice grips even tried extractor but didnt try cutting a slotany other ideas try to tap lightly with a small chisel. if you can get to it. try to turn it loose with it. Quote
Screaming Yellow Zonker Posted March 17, 2008 Report Posted March 17, 2008 Impact driver (the type you hit with a hammer) I have had to use mine a few times. The steel bolts in an aluminum case will cause them to corrode. Quote
T-daddy Posted March 17, 2008 Author Report Posted March 17, 2008 try to tap lightly with a small chisel. if you can get to it. try to turn it loose with it. thats another idea ill try in the morning any other ideas :biggrin: Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.