tuna Posted March 8, 2008 Report Posted March 8, 2008 can someone give me a few tips on what to check because my banshee wont start i put brand new spark plugs in i tryed it with the choke on and off and same with the gas but it wont start. Quote
steverb Posted March 8, 2008 Report Posted March 8, 2008 try flipping it to reserve. ive seen it happen to many times when you think theres enuf fuel but theres not. Quote
tuna Posted March 8, 2008 Author Report Posted March 8, 2008 i know there is plenty of fuel cause i just filled it up and i havent tryed to push start yet Quote
rubberneck Posted March 8, 2008 Report Posted March 8, 2008 Did you verify you are getting spark? Pull one of the plugs, stick it back in the cap and ground the plug against the head.. You should be able to see the spark while kicking it. Quote
nayr742003 Posted March 8, 2008 Report Posted March 8, 2008 check your spark check to see if any wires have come unplugged try to push start it if u have spark and nothing is un plugged make sure your kll switch in on run sicne you changed the plugs check and see that you didnt mess the coil wires up Quote
tuna Posted March 8, 2008 Author Report Posted March 8, 2008 k i got it started thx guys appreciate the help. im not really sure what did it but i checked every thing and then after a few kicks it started right up. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.