angler Posted March 7, 2008 Report Posted March 7, 2008 Hey guys, It's been a while since I had a stock head so I can't remember the torque pattern. I found this shot on ebay but I can't see the numbers very well, so I put the numbers where I thought they were. Am I right? Thanks, in advance. Quote
skylor Posted March 7, 2008 Report Posted March 7, 2008 Yeah tighten them in that pattern to 20 ft. lbs. of torque. Quote
David Keith Posted March 7, 2008 Report Posted March 7, 2008 Yeah tighten them in that pattern to 20 ft. lbs. of torque. Yes, but remember to tighten in phases. Like finger tight, then to 10 lb-ft of torque then final torque. Quote
ClimbAnyHill Posted March 9, 2008 Report Posted March 9, 2008 Do it in increments of 5! 5 - 10 - 15 - 20! Quote
KaosBanshee44 Posted March 9, 2008 Report Posted March 9, 2008 Nice thread i learned something, what about taking the head off repeat the process? Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.