8 plate clutch setups

[4stroker]

im really startin to get tired of the super hard clutch pull on my banshee with the 6 heavy duty springs in it

 

im thinking of running an 8 plate set up (1 extra plate), and just 3 standard springs and 3 heavy

 

do the hinson 8 plate kits run standard size banshee fibres and steels, and just use one more of each than normal? or do u have to use special plates?

 

has anyone machined their inner clutch hub and pressure plate to fit an extra fibre and steel into the stock set up? i thought i saw someone had done it somewhere..

 

thanks, mark

[wesw]

get an easy pull lever it will help

 

 

and 8 disk will help with holding but the springs really make the clutch.

[Bansh-eman]

im really startin to get tired of the super hard clutch pull on my banshee with the 6 heavy duty springs in it

 

im thinking of running an 8 plate set up (1 extra plate), and just 3 standard springs and 3 heavy

 

do the hinson 8 plate kits run standard size banshee fibres and steels, and just use one more of each than normal? or do u have to use special plates?

 

has anyone machined their inner clutch hub and pressure plate to fit an extra fibre and steel into the stock set up? i thought i saw someone had done it somewhere..

 

thanks, mark

i have the full 8 plate hinson setup, they run regualr steels and fibers. just one more. if you have a pancake then the bolt will not fit with the hinson pressure plate. you will need to get a longer bolt. I have several of them that fit the Cascade/Packard panckes let me know if you need one.