scooter6101982 Posted February 25, 2008 Report Posted February 25, 2008 ok so heres the deal i bought a lsr round style minus 2 swinger awhile back here on the hq im finally gettin ready to put it on but i dont have the spacers to make the rear caliper line up with the rotor can someone with the same swing arm give me the dimensions on them so i can make my own in the garage thanx alot any help appreciated scott Quote
Lepew Posted February 25, 2008 Report Posted February 25, 2008 Mine is .610" from the tube that holds the carrier on the swingarm to the caliper or another way to say it is the width of the caliper bracket and spacer is .610". Quote
rubberneck Posted February 25, 2008 Report Posted February 25, 2008 Mine isn't a lonestar, but im pretty sure most of the carriers and brakets are the same. The spacers are .390 Quote
scooter6101982 Posted February 25, 2008 Author Report Posted February 25, 2008 thanx i appreciate it ver much i have the plate jus not the spacers and cant see spendin 80 dollars on 2 spacers that can easily be made Quote
LiftdT4R Posted February 26, 2008 Report Posted February 26, 2008 I had the same deal on a swinger I bought. I assume your talking about the 2 aluminum "pucks" that go between the bracket and the caliper mounting plate.. If I remember right from doing mine, I fabbed up 2 - 1/2" spacers from aluminum stock. I'm not 100% on that though. I'll try and check for ya in the next day or so. Quote
scooter6101982 Posted February 26, 2008 Author Report Posted February 26, 2008 thats what im lookin 4 thanx alot to everyone lookin Quote
Lepew Posted February 26, 2008 Report Posted February 26, 2008 Not all the aluminum plates are the same thickness and some have recessed holes for the round spacers. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.