daisy Posted February 3, 2008 Report Posted February 3, 2008 i just installed a 4 mil crank and bored.40 over. can anyone tell me what size my shee is now? Quote
Bansh-eman Posted February 3, 2008 Report Posted February 3, 2008 (edited) 385 to figure out do this.... bore size in mm x bore size in mm x length of stroke in mm x .007854 x number of cylinders stock bore is 64mm stock stroke is 54mm so a bone stock motor would look like 64 x 64 x 54 x .0007854 x 2 = 347 Edited February 3, 2008 by Bansh-eman Quote
daisy Posted February 3, 2008 Author Report Posted February 3, 2008 385 to figure out do this.... bore size in mm x bore size in mm x length of stroke in mm x .007854 x number of cylinders stock bore is 64mm stock stroke is 54mm so a bone stock motor would look like 64 x 64 x 54 x .0007854 x 2 = 347 ok thanks Quote
ohiobanshee Posted February 3, 2008 Report Posted February 3, 2008 http://www.bansheehq.com/forums/index.php?showtopic=85931 Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.