bink98xcab Posted January 28, 2008 Report Posted January 28, 2008 does anyone know if jetting is my prob, i have fatties jetted perfect , and after putting the noss head on (21cc 148 &150psi) it seems to have lots some pull on the topend, but that was kind of expected but after i added th reeds its real sh!tty on bottom now, like of idle if i give it WOT it wont even get to tha pipe hit w out feathern tha clutch or backn off tha throttle. i'm in oklahoma under 500ft elv. sum1 pleas help, when its on tha pipe it has way more snap w tha reeds Quote
jmd0346 Posted January 28, 2008 Report Posted January 28, 2008 If you added hipo reeds you need to rejet. If they would work on your current jetting they wouldnt be much good. It wouldnt hurt to go back and write your thread in English so people can read it. You'll get a lot more help that way. Quote
bink98xcab Posted January 28, 2008 Author Report Posted January 28, 2008 ok your right on tha rambln bs, well the prob is after i added the head i lost power on top end like the powerband curve fell off prematurly, well after i added the reeds the low end rpms are very weak wheni lug the engine it acts like it doesnt wanna even pull very good at all its really choppy, and the high ends rpms were even affected more, and like i tried to say b4 off idle if i give it wide open throttle , it doesnt bog but doesnt rev very well eithr, and wont hardly on the pipe if i dont grab the clutch a lil Quote
bink98xcab Posted February 18, 2008 Author Report Posted February 18, 2008 ok well ive got the jetting down , i'm now using a 340 main, 27.5 pilot and it runs like a charm, well after i changed the coil, it seems to have been about 90% of the prob , and i only figured that out after i got stranded at one of my ridin sopots Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.