530grafix Posted January 13, 2008 Report Posted January 13, 2008 finish putting the intakes and carbs,pump and fuel lines on, problem is this. when i Kick it over it revs real high. slides are bottomed out. idel screws are all the way out and adjusters on top of carbs are all the way down. leak down test was good. WTF!!! any ideas? thanks Quote
alcoholbanshee Posted January 13, 2008 Report Posted January 13, 2008 finish putting the intakes and carbs,pump and fuel lines on, problem is this. when i Kick it over it revs real high. slides are bottomed out. idel screws are all the way out and adjusters on top of carbs are all the way down. leak down test was good. WTF!!! any ideas? thanks You are very lean.....Tell us a bit about your setup.....what carbs... what jets......etc etc etc!!! Quote
530grafix Posted January 13, 2008 Author Report Posted January 13, 2008 You are very lean.....Tell us a bit about your setup.....what carbs... what jets......etc etc etc!!! 55 piot, .120 main dump .120 38 mm airstrykers and the rest is in my sig. Quote
00tbanshee Posted January 13, 2008 Report Posted January 13, 2008 55 piot, .120 main dump .120 38 mm airstrykers and the rest is in my sig. what are the needles? Quote
530grafix Posted January 13, 2008 Author Report Posted January 13, 2008 what are the needles? EGN middle clip Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.