Bearing carrier

[04Leshee]

Rear axle bearings went.

 

 

on the sprocket side of the carrier a half of the bearing is stuck inside of the carrier.

and its chewed up on the outer part of the carrier.

 

i know i have to do a little grindin on the carrier to make the bearing go on..

 

but how do i take out the old bearing on the brake disc side?

 

and take out the half of bearing on the sprocket side?

[sheerider1026]

a long punch and a big hammer.. sounds like you may need another carrier as well.. just my thoughts, its hard to say on something like that wothout actually seeing it.. good luck.

[Michael Jackson]

i destroyed my old carrier the same way, bearings were shot, kept riding it and destoryed the inside and outside edges of the carrier, your bets bet just buy a used one from someone on here $30-40 or so

[04Leshee]

i already have the bearings

so is it worth puttin it all back together and riding it?

 

i've had so much down time since i've bought it.

 

 

should i buy a stock carrier? or an aftermarket one.?

 

 

and in the middle of the carrier, the metal tube thingy.

is that suposed to come out?

i can take pictures and post them??

[RoushRacing13]

I've got a stock carrier ( $40 shipped PM me ). That tube thingy is to keep you from pushing the center race out when you tighten the axle nut. Yes, you need it.

[chillls]

try freezing it to get them out

but if you have to buy one get an after market one

[04Leshee]

should the tube inside of the carrier come out??