Jump to content

banshee hard to start after being riden


dirtdemon

Recommended Posts

probably not, most spark issues will cause running problems. I would be inclined to check the choke crossover tube, pilot jets, air screws first. Then probably engine compression. You get down around 100 psi and they will run, but will be hard to start.

Link to comment
Share on other sites

probably not, most spark issues will cause running problems. I would be inclined to check the choke crossover tube, pilot jets, air screws first. Then probably engine compression. You get down around 100 psi and they will run, but will be hard to start.

yep my banshee was hard to start warm and it turned out to be low compression. about 60-70psi and it still ran :woot:

Link to comment
Share on other sites

ive checked my compression at cold, wot, 12 kicks 110 psi both cylinders. im not sure how many times im sposed to kick it over ? i know for a car its like 3 turns so ... my plugs are the usual brownish color, havent rechecked jetting yet. i also checked the fire and it seems a bit weak..

Edited by dirtdemon
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...