xXBlessedWithDeathXx Posted December 17, 2007 Report Posted December 17, 2007 (edited) I`m thinking of swapping my stock bore jugs. i just want to see whats out there so let me know what you`ll give up and if i decide they go i`ll get back to you. i dont have pics i need a hard drive to upload the camera drivers so no pics at this time. the cylinders are perfect. i replaced the rings in them a few months back and they are not scared or in need to be bored. i`m looking for a A-frame maybe plastic but open to all offers. The jugs were pulled from this Shee. Edited December 17, 2007 by xXBlessedWithDeathXx Quote
NYUK Posted December 17, 2007 Report Posted December 17, 2007 i got an 01 a arm frame, upper a arms and swinger. 200 and the jugs. come n get it. i will throw in some front and rear plastics.215 880 1990. Quote
xXBlessedWithDeathXx Posted December 17, 2007 Author Report Posted December 17, 2007 i`ll keep you in mind. i work 6 days a weeks so a road trip is not so easy. Quote
crazybanshee Posted December 18, 2007 Report Posted December 18, 2007 I am interested in a stock set of jugs. Let me know. Doug Quote
xXBlessedWithDeathXx Posted December 18, 2007 Author Report Posted December 18, 2007 I am interested in a stock set of jugs. Let me know. Doug what do you got? Quote
xXBlessedWithDeathXx Posted December 30, 2007 Author Report Posted December 30, 2007 Got the computer done so here is pics. the pistons are still on the shee but i`ll have them off in a few days. i will be trading or selling these stock bore cylinders / piston rings with a head and head gasket. if they dont go on here they will be on ebay. Quote
BB3 Posted December 31, 2007 Report Posted December 31, 2007 (edited) Do you want to just sell the cylinders? If so how much? Edited December 31, 2007 by BBIII Quote
xXBlessedWithDeathXx Posted December 31, 2007 Author Report Posted December 31, 2007 If i can get a reasonable offer i would sell just the cylinders. PM me with offers and i`ll see what i can do. Quote
xXBlessedWithDeathXx Posted January 1, 2008 Author Report Posted January 1, 2008 What bore are they? stock bore 64mm Quote
zach45 Posted January 1, 2008 Report Posted January 1, 2008 pm me with what your looking for them... i wanted to get a second set of stock bore.. Quote
Toybreaker Posted January 9, 2008 Report Posted January 9, 2008 (edited) 66mm DRAG port with blaster pistons for a 370 long rod straight across. Throw in $400 V-force II's and 35mm pwks, intakes and with a throttle cable. PM me if you are interested Edited January 9, 2008 by Toybreaker Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.