Jump to content

Tyson 10 mil Cub,Head,Reeds,Intakes


Recommended Posts

Guest cheetabanshee11
Posted

Ok guys i am putting this on here for a buddie of mine here is what he has:

 

Tyson Ported 10 mil Cub with Pistsons 68mm bore

Stock Cut Head

10 mil Forged Crank

V Force 2 Reeds

UPP intakes

39 pwk carbs for fuel pump

1-5 OverRide Tranny

RDZ 2 Out Left Side with stingers Bare

 

he just wants 2200 for all this the motor has only about 3 min of run time and yeah i mean 3 min that is on the crank and whole top end the pipes has about 10-15 passes on them....

Posted
Ok guys i am putting this on here for a buddie of mine here is what he has:

 

Tyson Ported 10 mil Cub with Pistsons 68mm bore

Stock Cut Head

10 mil Forged Crank

V Force 2 Reeds

UPP intakes

39 pwk carbs for fuel pump

1-5 OverRide Tranny

RDZ 2 Out Left Side with stingers Bare

 

he just wants 2200 for all this the motor has only about 3 min of run time and yeah i mean 3 min that is on the crank and whole top end the pipes has about 10-15 passes on them....

 

Is this a complete assembled motor? If so, that is a sick price for everything.

PICT0961.jpg

Guest cheetabanshee11
Posted

no its not completely assembled it dont have cases or the clutch set up or flywheel and stator but has everything else...

 

ill check on the crank and top end i would say around 1500 for it .....

Guest cheetabanshee11
Posted

and seriously this motor has like 3 min on it we put it on the frame that he had bought and it needed a bracket made for the pipes so i held the pipes on by hand and he started it and ran it just long enough for the pipes to start getting hot where i couldnt hold them...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...