K&N for 35 MM KEININ PWK CARBS

[slingshotmb]

Hello im trying to find a dealer that sells these

Thanks.

Mikeb.

[jbooker82]

What kind of Intake do you have. I got mine from www.Cascadeinnovations.net they sent me the 20 deg angled ones first. They were to much of an angle because I have a thick boss racing intake. So I swapped them out for some ones that have a 10 deg angle. They fit really good.

 

The K&N part number for the 10 deg ones I am running is RU-1090.

Edited November 14, 2007 by jbooker82

[theshee]

If you are looking for keihin 35mm PWKs hit up Jeff at FAST. Great price on them, just got a set last week.

 

Nevermind, Im a tard, I thought you wanted the carbs, not the K&N, but im sure he has them too.

[slingshotmb]

What kind of Intake do you have. I got mine from www.Cascadeinnovations.net they sent me the 20 deg angled ones first. They were to much of an angle because I have a thick boss racing intake. So I swapped them out for some ones that have a 10 deg angle. They fit really good.

 

The K&N part number for the 10 deg ones I am running is RU-1090.

 

Heres what im working with...also who makes a bracket for the coolant tank..i need to lose the cut up air box.. maybe also a mud cover of some sort.

also can i use any green 50/50 mix.. coolant tanks empty.

 

i might dump these carbs for a single ?

[slingshotmb]

Heres what im working with...

also can i use any green 50/50 mix.. coolant tanks empty.

 

i just might dump these carbs for a single ?

[jbooker82]

Yea you can just use regular antifreeze.

 

For the water bottle bracket you can cut the back off your stock air box. I run an armidilo bracket. They make one regular one and one that holds a spare set of plugs. I run the one with the plug holder.

Armidilo Water Bottle Bracket from RM ATV LINK

[jbooker82]

I was just wondering what kind of an intake your were running. If your running a Boss Racing style then you wont want the Pod fitlers with a 20 deg angle. They will angle down to far and rub really bad on the cross bar under the fitlers. The angled K&N's fit better than the straight foams. Looks like the foam filters are touching the pipes. The angled K&N's you can move them around so the dont touch.

 

Here is a pic of my intake. You can see that the intake already angles the carbs back down and with the 20 deg filters it was just to much.

[jbooker82]

Another thing if you get a set of pods from cascade then get a pair of there exhaust heat wraps. You slide them over the silencer tubs. They also help keep from melting the outerwears. They have 2 different lengths. I run the shorter ones with my toomeys.

Cascade Heat Wraps LINK