redoin the quad

[ny98banshee350]

ok so here goes!

 

back in aug friend and i were riding in our local spot

we met up with some kids 4 outa 5 on shees make a long story reall short

1 kid broke his tierod, i ended up piggy backin him on mine back to our trailers

well i overheated the motor(think i blew up the water pump) which in turn took out the clutch(so i hope!)

 

well takin eveything apart and i found out that i bought the biggest lemon ever!!!!

bolts are stripped in the frame or broken chassis looks like balls

so im completly redoin every thing

from the ground up powderin everything i can and buyin all new everything that i can

 

the only thing thats goin to stay is frame and swingarm rest will be new and better

 

well heres the ?? i got as of right now i need a complete bolt kit

cus there are screws were there should be bolts with nuts and its just a big mess

 

were can i go for this i saw a couple on ebay but i dont know if there the right ones

 

can i get a complete kit from a yamy dealer or wut

 

thanks for ur help so far im sure ill have more ? as the time goes on!

here are some pics of were im at

 

[ny98banshee350]

any 1???

[WALLACE84]

should be a good winter project!!! just keep that bumper off....

[spike]

you can get a stainless steel bolt kit from ebay for around 100$ they are perfect for what you want, I got one on my last rebuilt and i'm really happy with it, I didnt use them on critical points like motor or A-arms/shocks but for everything else its great, and I have a lot of leftovers for spares too.

[ny98banshee350]

nah man i love that bumper!!!! im goin to have the frame a-arms, swingarm, both bumpers and hubs powdered lime green

 

with them bolts... im missing dif in like the primary covers and stuff like that

 

also its kinda of a dumb ? and im pretty sure i no the anwser just want to make sure

 

i have an a-arm frame right not a j-arm

reason im askin cus im buyin a new frame cus the one i got welds are brokin and alot of the bolts are stripped!!

thanks again ill keep u guys updated!

[wacko2000]

Good luck with the rebuild.Im just finishing up mine, it went pretty goood..

make sure you change all the bearings and seals... While you have it stripped you should get some gussets put in some of those weak spots on the banshee frames...What year is that shee? and yes you have a A-arms frame...

[ny98banshee350]

its a 98 how long did ur rebuild take???

 

and if u dont mind me askin wut did u do and what was the total

 

not that im on a budget its just goin to take a while for me to get everything i want

 

im over shooting this but im planin on being completely done(hopefully dont run into problems with my truck) next winter

 

i no im def in this for at least $4,000 but its ok lol cus my shee will be crazy when im done!!!

[wacko2000]

Well my build took me awhile bc of work.. I was working some crazy crazy overtime..

The build really shouldnt take that much time at all...Everything goes back together pretty quick..

what type of riding do you do and what are you looking to get out of it?

[Screaming Yellow Zonker]

I did mine this past spring

 

 

Check your steering stop they like to bend and break.

Now is the time to replace the swing arm bearings and chain slides.

Front arm bushings.

Lower steering shaft bearing.

 

Good luck and have fun.

[toyotaman]

hey you can get a full banshee bolt kit from cascade innovations, they are all stainless steel too. but its pretty pricy. i cant remeber how much is was though. my bro bought a banshee bolt kit off line from ebay, it was new but alot of the shit didnt work. and they dont come with like that big swing arm or the ones for the upper a arms. i think that goes for all the kits.

[ny98banshee350]

Well my build took me awhile bc of work.. I was working some crazy crazy overtime..

The build really shouldnt take that much time at all...Everything goes back together pretty quick..

what type of riding do you do and what are you looking to get out of it?

 

i see ur from staten island... im from long island! suffolk county!

um i do alot of trail riding,dirt, mud,sand,grass

i just want this quad to be hot!! lol reliable really

 

 

 

 

 

I did mine this past spring

 

 

Check your steering stop they like to bend and break.

Now is the time to replace the swing arm bearings and chain slides.

Front arm bushings.

Lower steering shaft bearing.

 

Good luck and have fun.

 

yea um all steering components are new i had to replace all of that

im doin a new swing arm so ill def be doin all bushings

and chain slides

and im doin the a-arms from a yfz so im doin everything right!!!!

thats y i said it was goin to take a while for me cus i dont make much a week after all the bills are paid!

[Screaming Yellow Zonker]

Cool. Take your time and don't cheap out on important parts. Your life could depend on it. Keep us up dated... :thumbsup:

[ny98banshee350]

Cool. Take your time and don't cheap out on important parts. Your life could depend on it. Keep us up dated... :thumbsup:

 

with out a doubt im in no rush i want it perfect i can see it in my mind u know!! lol

 

anyways heres the bolts kit im goin to use

lil pricey but hey! only the best for the shee lol

 

http://www.ssstainless.net/banshee.html

[Michael Jackson]

id get all grade 8 hardened bolts for suspension components, they are a little expensive but worth it

[wacko2000]

with out a doubt im in no rush i want it perfect i can see it in my mind u know!! lol

 

anyways heres the bolts kit im goin to use

lil pricey but hey! only the best for the shee lol

 

http://www.ssstainless.net/banshee.html

 

Yea im from Staten island..

where do you ride, you have any good places, I dont mind driving..

LIsten to MJ and get all #8 bolts for the suspension, they are stronger..

I got my bolt kit from some1 on ebay, its good....

Im getting my motor back on fri-sat, cant wait to ride my shee....