fredloke Posted October 22, 2007 Report Posted October 22, 2007 ok i just came back from glamis and didnt get to ride my shee i couldnt get it to start. the night before we left to glamis i installed a ricky stator timing plate and put it at +4, i checked plugs and theres no spark please help! Quote
fredloke Posted October 22, 2007 Author Report Posted October 22, 2007 i didn't have a feeler gauge but it seemed close enough Quote
samc Posted October 22, 2007 Report Posted October 22, 2007 go pick up a feeler guage, i cant remember what its suppose to be set at but set it to the right settings and then kick her over, make sure your key switch and kill switch is on as well. Quote
fredloke Posted October 22, 2007 Author Report Posted October 22, 2007 how do you adjust the coil its held by screws and theres not much room for it to move Quote
krazy jake Posted October 22, 2007 Report Posted October 22, 2007 you just loosen the screws and gap it . i think i read its roughly the thiknes of a matchbook cover.... im not sure though i believe its like .18mm or sumthn... if u do a search you should find the proper gap. :thumbsup: Quote
Bansh-eman Posted October 22, 2007 Report Posted October 22, 2007 you just loosen the screws and gap it . i think i read its roughly the thiknes of a matchbook cover.... im not sure though i believe its like .18mm or sumthn... if u do a search you should find the proper gap. :thumbsup: yup its about a match book.... Quote
xXBlessedWithDeathXx Posted October 22, 2007 Report Posted October 22, 2007 (edited) how do you adjust the coil its held by screws and theres not much room for it to move you dont need to move it much the gap is between .15 and .20 if your not over or under your good. and make sure you gap it with the part sticking out the center of your flywheel , the round part of the wheel. if not you brake shit. Edited October 22, 2007 by xXBlessedWithDeathXx Quote
fredloke Posted October 23, 2007 Author Report Posted October 23, 2007 (edited) i just adjusted the coil but i still have no spark wtf do i do Edited October 23, 2007 by fredloke Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.