imgoodatwhatido Posted October 7, 2007 Report Posted October 7, 2007 can i use a CR500 carb on a 2-1 setup? im thinkin of saling my bike but if i were to keep it i would like to try the 2-1 setup buty god knows i dont have the money to buy one straight out...could i make this work an it still make good power? Quote
TurboBanshee420 Posted October 7, 2007 Report Posted October 7, 2007 It will work fine. It's a 38mm kiehin I think. I used a 38mm mikuni TMX flatslide and I had great power. almost like twins, but all the bottom end. Quote
imgoodatwhatido Posted October 7, 2007 Author Report Posted October 7, 2007 thats what i was thinking...i figured that carb was efficient feeding 500cc's..so why wouldnt it feed 350 modified cc's efficiently Quote
imgoodatwhatido Posted October 9, 2007 Author Report Posted October 9, 2007 thats what i was thinking...i figured that carb was efficient feeding 500cc's..so why wouldnt it feed 350 modified cc's efficiently i can get one hell of a deal on a 33mm PWK keihin...but would it feed a mildly modified motor good enough? Quote
Snopczynski Posted October 9, 2007 Report Posted October 9, 2007 It ought to make a little more low end because of the velocity, but may choke off the top end a tiny bit. We had a 38mm lectron on a woods ported 4mill and it didn't have as good acceleration as the 36mm lectron we ended up going with on it. Quote
imgoodatwhatido Posted October 10, 2007 Author Report Posted October 10, 2007 It ought to make a little more low end because of the velocity, but may choke off the top end a tiny bit. We had a 38mm lectron on a woods ported 4mill and it didn't have as good acceleration as the 36mm lectron we ended up going with on it. well that 33 mm PWK sold for 55$..looked almost brand new....i was sleepin an missed out !!!!!!!! Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.