'89bansheeman Posted October 2, 2007 Report Posted October 2, 2007 I replaced the toomey 1 into 2 air cleaner/filter set up with dual k&n pods [seperate cleaner per carb.]. Shee seems like its flooding and no top end what so ever. Didnt replace the jets and figuring this may help. It has toomey t-5s and the k&n's ported and polished cool max head. Any suggestions on jet size needed? Quote
slowpokebanshee Posted October 2, 2007 Report Posted October 2, 2007 I don't think the jetting should change at all, I have done similar swap, with no problems..... Quote
RUDEDAWG Posted October 2, 2007 Report Posted October 2, 2007 I don't think the jetting should change at all, I have done similar swap, with no problems..... Yup, but dont forget to do a plug chop just to be safe. Quote
slowpokebanshee Posted October 2, 2007 Report Posted October 2, 2007 any chance you disconnected the choke tuibe? balance tube? Quote
'89bansheeman Posted October 2, 2007 Author Report Posted October 2, 2007 O.k. not so sure if it's the jetting now. Did a compression test and left side was around 100 and rt. side only 70 so looks like I'll be having a project for this winter. What compression reading should I be getting? :: :: :: :: :: :: Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.