kaotik1 Posted September 27, 2007 Report Share Posted September 27, 2007 (edited) Okay guy's I have decided to sell this project. I will be taking a loss on it, but I know someone will want this. I am looking to get $3800 for it. Feel free to ask questions, I will answer them all. To get this thing running you will need the following parts. 1. Airbox with the battery re-locator 2. Chain, I think I may have an extra though 3. Axle nut This thing has not even been fired up since the motor was rebuilt. To make this think pretty much show or track ready you will need the following 1. Plastics, the stock yellows aren't the best against the orange. 2. Tires to go on the the extra set of powdercoated rims. 3. Shocks for the front, as it has stockers on it now, just to hold it up. It's a 2002 400ex 2002 400ex gusseted and powdercaoted frame with title. ASR pro +2+1 black braided brake lines front and rear I have stock rims powdercoated black chrome need tires, but I also have the stock rims with tires on them. All new bearings throughout, the bike Stainless steel swing arm bolt G-force +2 axle Sub-frame now has a removable grab bar battery box tabs removed, so this will need the relocation box for the battery. Houser racing +2 stem with anti-vibe fat bar ASV levers clutch and brake Larger oil cooler coated black chrome. The motor is a 426 hi-compression JE piston stage2 hot cam, with the stronger timing chain. Cometic head gaskets. The head pipe was hi-temp coated polished silver, heat shield black, and the can black. Here are a few pictures http://northeastcoatings.net/tj/IMG_6946.JPG http://northeastcoatings.net/tj/IMG_6945.JPG http://northeastcoatings.net/tj/IMG_6944.JPG http://northeastcoatings.net/tj/IMG_6943.JPG http://northeastcoatings.net/tj/IMG_6942.JPG http://northeastcoatings.net/tj/IMG_6941.JPG http://northeastcoatings.net/tj/IMG_6940.JPG http://northeastcoatings.net/tj/IMG_6917.JPG http://northeastcoatings.net/tj/IMG_6898.JPG http://northeastcoatings.net/tj/IMG_6753.JPG I have a ton more pictures if you want to see something just ask. I may even concider a trade for a 4 stroke bike.. Edited September 27, 2007 by kaotik1 Quote Link to comment Share on other sites More sharing options...
kaotik1 Posted October 3, 2007 Author Report Share Posted October 3, 2007 Offers? If not this will be getting parted out, not that I want to do that. Quote Link to comment Share on other sites More sharing options...
kaotik1 Posted October 18, 2007 Author Report Share Posted October 18, 2007 Any reasonable offer will take this. I just need to make room for my new project. Quote Link to comment Share on other sites More sharing options...
LiftdT4R Posted October 18, 2007 Report Share Posted October 18, 2007 Bump for ya bro, I am fresh out of cash down here, otherwise I'd be all over that, you guys do some real quality work! My parts came out awesome that I sent up there! Quote Link to comment Share on other sites More sharing options...
kaotik1 Posted October 22, 2007 Author Report Share Posted October 22, 2007 (edited) Bump for ya bro, I am fresh out of cash down here, otherwise I'd be all over that, you guys do some real quality work! My parts came out awesome that I sent up there! Thanks man! Just time for me to do something different you would be suprised what I would let this thing go for right now. I can't believe not even an offer. I will help deliver within reason also. Edited October 22, 2007 by kaotik1 Quote Link to comment Share on other sites More sharing options...
BaNsHeeJuNkEy Posted October 22, 2007 Report Share Posted October 22, 2007 I will showe my brother this thread he mit want some part for his. if your going to part out. Quote Link to comment Share on other sites More sharing options...
kaotik1 Posted October 22, 2007 Author Report Share Posted October 22, 2007 I tried to part it out, but it seems as if everyone is only intrested in the ASV levers. I am not going to strip what I have done just for levers. I would rather sell it whole I need the room, and don't want to sit on parts waiting for them to sell. Quote Link to comment Share on other sites More sharing options...
BaNsHeeJuNkEy Posted October 23, 2007 Report Share Posted October 23, 2007 Ya i know what you mean. Quote Link to comment Share on other sites More sharing options...
kaotik1 Posted October 23, 2007 Author Report Share Posted October 23, 2007 Ya i know what you mean. Just sucks when you have so much work into something, and when it comes time to get nickled and dimes over parts that are 100 dollars direct from the manufacture. Quote Link to comment Share on other sites More sharing options...
BaNsHeeJuNkEy Posted October 23, 2007 Report Share Posted October 23, 2007 Just sucks when you have so much work into something, and when it comes time to get nickled and dimes over parts that are 100 dollars direct from the manufacture. well my brother is interested in just the hole motor the way it is. no exhaust or anything. don't know how much you would want for it or if you want to do that or not and sell the rest as a rollor. i live in mass so we could do some kind of pick up if you realy wanted to do it. but if not i understand. i have parted out a car before that i built it suck. Quote Link to comment Share on other sites More sharing options...
kaotik1 Posted October 24, 2007 Author Report Share Posted October 24, 2007 For now I am going to hold off on parting it. I am trying to see what people are willing ot give me whole, basically looking to just off it cheap for the room right now. Quote Link to comment Share on other sites More sharing options...
BaNsHeeJuNkEy Posted October 24, 2007 Report Share Posted October 24, 2007 For now I am going to hold off on parting it. I am trying to see what people are willing ot give me whole, basically looking to just off it cheap for the room right now. ok if anything changes let me know. bump for a nice looking bike. Quote Link to comment Share on other sites More sharing options...
kaotik1 Posted October 30, 2007 Author Report Share Posted October 30, 2007 I hate do do this but $2800 takes it. Worth way more than that, that is for sure. Quote Link to comment Share on other sites More sharing options...
Qwk98svt Posted October 31, 2007 Report Share Posted October 31, 2007 Interested in trades? e-mail me at Qwk98svt at hotmail dot com hope to hear from you -Jeff- Quote Link to comment Share on other sites More sharing options...
kaotik1 Posted October 31, 2007 Author Report Share Posted October 31, 2007 depends on what you are looking to trade for. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.