yamaperv Posted September 24, 2007 Report Posted September 24, 2007 I recently was catwalking my shee and a fell off like usual and it laid on it's side when it came down I bent my right upper control arm for sure and I think I bent the shock too does any body make heavier control arms or are you pretty limited to factory? Quote
moneybags Posted September 24, 2007 Report Posted September 24, 2007 You can get your self some aftermarket +2+1 a-arms. Or you can buy stock ones. If you go the stock rout, I have a set of stock a-arms for sale. PM me if your interisted. I have stock shocks also. Quote
yamaperv Posted September 24, 2007 Author Report Posted September 24, 2007 You can get your self some aftermarket +2+1 a-arms. Or you can buy stock ones. If you go the stock rout, I have a set of stock a-arms for sale. PM me if your interisted. I have stock shocks also. What is this +2 +1 stuff i've seen alot of it but what is it Quote
ClimbAnyHill Posted September 24, 2007 Report Posted September 24, 2007 That means they're aftermarket A Arms. Not stock but a diff company who came up with something better. +2 means the A Arm is 2 inches wider. +1 means the A Arm is moved fwd an extra inch. It's a really good upgrade & there are many to choose from. I have MX Quicksand +2 +1 A Arms. Here's a thread Sandshots started, take a look at all the diff +2+1 setups BHQ'ers are running: http://www.bansheehq.com/forums/index.php?...mp;hl=quicksand Quote
yamaperv Posted September 27, 2007 Author Report Posted September 27, 2007 That means they're aftermarket A Arms. Not stock but a diff company who came up with something better. +2 means the A Arm is 2 inches wider. +1 means the A Arm is moved fwd an extra inch. It's a really good upgrade & there are many to choose from. I have MX Quicksand +2 +1 A Arms. Here's a thread Sandshots started, take a look at all the diff +2+1 setups BHQ'ers are running: http://www.bansheehq.com/forums/index.php?...mp;hl=quicksand Thanks that helps alot Quote
RZBansheeMan Posted September 27, 2007 Report Posted September 27, 2007 I recently was catwalking my shee and a fell off like usual and it laid on it's side when it came down I bent my right upper control arm for sure and I think I bent the shock too does any body make heavier control arms or are you pretty limited to factory? :yelrotflmao: :yelrotflmao: :yelrotflmao: That is some funny shit that happened to you...... It happened to me too LOL more than once, I took my upper a-arms and gusseted them so they couldn't bend any more (the new ones that is). Quote
Michael Jackson Posted September 27, 2007 Report Posted September 27, 2007 yep , done the same thing to my old stockers, they are just cheap and week, Quote
Justintoxicated Posted September 28, 2007 Report Posted September 28, 2007 (edited) yep , done the same thing to my old stockers, they are just cheap and week, Or do both, Chromoly aftermarket with unibals and gussets, you can get the top gusset too if necessary. These arms have taken some abuse. Edited September 28, 2007 by Justintoxicated Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.