tors removed but still massed up

[04titanse]

i bought my 2000 shee stock. only i though Tors was removed because there are moose carb caps and a new throttle cable and the big units over the carbs arer not there but..... today i did the e-brake block off kit and when i pulled the cable out the bike wouldnt rev at all then i manually pushed the e-brake handle thing and then the bike would run fine.

 

basically because i pulled the cable out it was sensing the brake was on and not letting it rev. how is this possible if tors is removed.

 

I cut the wires and now it runs fine but i am curious why this happend.

[Hilarious]

i bought my 2000 shee stock. only i though Tors was removed because there are moose carb caps and a new throttle cable and the big units over the carbs arer not there but..... today i did the e-brake block off kit and when i pulled the cable out the bike wouldnt rev at all then i manually pushed the e-brake handle thing and then the bike would run fine.

 

basically because i pulled the cable out it was sensing the brake was on and not letting it rev. how is this possible if tors is removed.

 

I cut the wires and now it runs fine but i am curious why this happend.

 

All that shit is hooked together into the electrical system.

Look under the gas tank on the left side.

There should be a small box, bolted to the frame.

You should also remove that.

:beer:

[xXBlessedWithDeathXx]

what he said.

[04titanse]

alright cool thanks guys!

[Michael Jackson]

the bike wont idle if the black box on the frame is still plugged in

the bike wont rev if the parking break sensor is still plugged in