Jump to content

Recommended Posts

Posted

This is where I got my last cable (below), they have one for a twist too. The springs on the TM 34mm Mikuni are stiff as F**K. You will probably want to cut a couple coils if you keep the thumb throttle. I cut mine so that the spring wants to hold the carb top about 1/2" above the carb body when it is unfastened and I still have plenty of spring to keep the slide down, still way stiffer than stock. I had a twist throttle when I first got the 34mm Mikunis and that was a lot more comfortable but I didn't like a twist in the sand whoops.

 

vitos 34mm Mikuni and stock thumb throttle

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...