baddsheee Posted August 13, 2007 Report Posted August 13, 2007 When out to Dumont for some night drags. Met up SoCalnit and his buddies. 3 out of 4 Banshees didn't run good. Mine blew a head gasket. I think I'm gonna go with the Noss head. In the morning I put like 3 bottles of water in my radiator, that's how low it ran. The clear coat on my jugs turned brown from so hot it ran. My plugs are wet with water. I drained the coolant and its black. Any suggestions on what to look out for when I tear into it? Possibilities of any damage? Quote
fastbanshee8 Posted August 14, 2007 Report Posted August 14, 2007 Make sure your water pump impellar is good, along with the bearing, and seal. Now mignt be a good time to put a billet impellar in, if you don't already have one. Quote
CenCalBanshee Posted August 14, 2007 Report Posted August 14, 2007 How were the drags? Who won and such if you guys were out there that long. Too hot for me out there right now, I think the soonest ill be out there is thanksgiving week. Quote
baddsheee Posted August 14, 2007 Author Report Posted August 14, 2007 How were the drags? Who won and such if you guys were out there that long. Too hot for me out there right now, I think the soonest ill be out there is thanksgiving week. Drags were pretty cool, bikes were running up the hill till like 2:00am. Weather was HOT! I was able to run for about 3-4 hours on and off, till it started to run like shit. I was also running very rich. SoCal's cubby wasn't running right so didn't run it. SoCal's friend's banshee also took a shit(clutch). But it's just nice to get to some sand till the season kicks. It's pretty f*cked up to say that Banshee hill was mostly being ran by 4pokes. :: Halloween weekend we need some more banshees out there. I believe Socalnit mentioned Halloween weekend. I'm definately there with my shee running stronger this time :woot: . Think I might go with some 19cc domes, haven't decided yet. Quote
CenCalBanshee Posted August 15, 2007 Report Posted August 15, 2007 If I have my bike together by then maybee Ill head out there on halloween also Quote
Rollerstarter Posted August 16, 2007 Report Posted August 16, 2007 my gasket on my cool head prodesign leak a little bit on 1 cylinder my prestone level always corect im not need to refil. any idee ton fix this problem or im need to buy new gasket set. my cool head is new and my head is torked at 20lbs. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.