yfzdunejumper Posted July 30, 2007 Report Posted July 30, 2007 Yes with a lamp not with an oven Quote
XxMeltIcexX Posted July 30, 2007 Report Posted July 30, 2007 I did mine in an oven, just make sure yous PC guy knows his stuff, they always have ways of doing it if they know what they are doing... If the teflon comes out of the ball socket then they are no good. Eric Quote
bansheeyfz Posted July 31, 2007 Author Report Posted July 31, 2007 so what exactly should i tell this guy? Quote
KaosBanshee44 Posted July 31, 2007 Report Posted July 31, 2007 Anything is possible, just gotta know where to get the right shit to do it right. Good luck Quote
allstarbanshee Posted July 31, 2007 Report Posted July 31, 2007 Anything is possible, just gotta know where to get the right shit to do it right. Good luck Ive owned a prof. powderCoat shop for 6 yrs now. I did the a-arms on my 04 and 05 Banshee. They are in perfect working order I have 3 different ovens at my business NO LAMPS!! as long as you get down to the ALL METAL portion with no sleeves or bearings or anything and clean out all the grease itll be fine. Regrease all components before re-assembly. the 04 gets trail riding 15-20 days out of a typical month. the 05 is stretched 10inches with a big motor :biggrin: and is drag race only. I dont think twice about my a-arms when riding or racing either theyre fine. Just find a knowledgable Powdercoater. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.