candyred04 Posted June 12, 2007 Report Share Posted June 12, 2007 I have a pair of flat slide mikuni 34's that i am trying to get jetted for first time start up here are my mods 17cc domes cpi inframes full port matched pistons advanced timing pro design manifolds vf3 reeds I think thats it there might be more any help you can give me would be awsome Quote Link to comment Share on other sites More sharing options...
Heb Posted June 20, 2007 Report Share Posted June 20, 2007 Nobody here seems to mess with any Mikunis other than stock roundslides here. I asked a question a while back about what needle to try with flatslide 28s and no one had a good answer. Good Luck :biggrin: Quote Link to comment Share on other sites More sharing options...
JOBEY Posted June 25, 2007 Report Share Posted June 25, 2007 I had Tm 34 flatsides board to 35.5. I ran a 340 main 50 pilot and Neelde was 2nd from the top or one up from middle. This was on a K&T 350 with CPI pipes. This should get you really close Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.