blacknred03 Posted May 30, 2007 Report Posted May 30, 2007 (edited) Free Photo Hosting - PicTiger Fast dune port 20 cc domes cool head v3's 36:1 320 mains 5th clip sea level Stock carbs No lid and k@n +4 timing plate had about 2 hours on it, not beat on at all. Can I get away with a hone and pistons? Go up to a 340? Edited May 30, 2007 by blacknred03 Quote
FASTOYS Posted May 30, 2007 Report Posted May 30, 2007 Looks too lean for your altitude or bad gas. Send me some pics of the cyls and will see if they can be honed. Quote
letsgetthisdone Posted May 30, 2007 Report Posted May 30, 2007 (edited) Looks just like mine did, except it went all the way through the piston....lol. Prolly bad gas man, cuz my jetting was good, and your piston looks like mine, except like i said, that main spot in the middle actually went through...lol Edited May 30, 2007 by letsgetthisdone Quote
BansheeKid15 Posted May 30, 2007 Report Posted May 30, 2007 Not to hyjack your thread, but i took a look at my pistons yesterday, they have the standard carbon, but where the spark plug goes (the size of the inside hole) there is a circle on the top of the piston, should i be worried? Mods are in my sig, 270 mains... Im going to pismo on thursday so some quick advice/info would be greatly appreciated! Quote
halfrack Posted June 2, 2007 Report Posted June 2, 2007 That looks almost identical to what my piston in my Fl250 looked like. The problem was a lean condition caused by an air leak. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.