can i still use my stock airbox with the 2 into 1 carb?

[peterlocal22]

thinking of getting a 2 into 1 carb and was wondering if the stock airbox would still hook up or do i have to changeit?

also what 2 inot 1 carb do all of you recomemend?

thanks

[Banshee0028]

thinking of getting a 2 into 1 carb and was wondering if the stock airbox would still hook up or do i have to changeit?

also what 2 inot 1 carb do all of you recomemend?

thanks

Yep stock airbox will be fine. U will need a prodesign adapter thing, but thats about it. I have one and it works great. I am running the trinity intake with a 35mm Kehin PWK :thumbsup:

Edited May 18, 2007 by Banshee0028

[Washburn]

Yes Trinity makes an adaptor plate for your stock airbox and the carb sits nice and snug ruit in there. I recomend the Trinity 2:1 setup with a 35mm PWK espically if you plan on getting port work. If your not going to get it ported the 33 PWK will work wonders.

 

http://www.trinityracing.com/products/yama...nsheecvkit.html

 

 

Sweet setup. Ill be running one thats for sure.

[Hollister_Hitman]

like i said in the other post get the 35mm with the airbox adapter. You CANT run the lid without a minor mod cause the snorkel hits the throttle cable connection at the carb. Also make sure you use some kind of sealant inbetween the airbox and the adapter cause there is no lip on the adapter. You will see what I am talking about when you get it