dek321 Posted May 7, 2007 Report Posted May 7, 2007 i used to run stock motor with pro curcuit pipes, White Brothers boost bottle and air box(270 mains) now i swith to k&n pods and ptr mids pipes and White Brothers boost bottle,stock motor my elevation is 400 to 600 feet what sould be my jetting? Quote
locogato11283 Posted May 7, 2007 Report Posted May 7, 2007 id jump up to a 290 and work from there..those pods will flow a lot more air than a stock box. change jets and do a WOT plug check. Quote
dek321 Posted May 7, 2007 Author Report Posted May 7, 2007 id jump up to a 290 and work from there..those pods will flow a lot more air than a stock box. change jets and do a WOT plug check. thanks a lot! Quote
dajogejr Posted May 7, 2007 Report Posted May 7, 2007 330s and work your way down. Typically...same elevation here, T5, FMF and PT pipes need a 320 to 340 main on stock porting motors...with pods only. Quote
dek321 Posted May 8, 2007 Author Report Posted May 8, 2007 330s and work your way down. Typically...same elevation here, T5, FMF and PT pipes need a 320 to 340 main on stock porting motors...with pods only. oh ok tanks i will start with 330 Quote
dek321 Posted May 10, 2007 Author Report Posted May 10, 2007 ok but do the temp will affect my jetting it about 55-75degre here....thanks Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.