how do u pull the flywheel of

[liquedfire]

what puller do u need to do this????

 

 

will a 3 jaw puller work??????

 

 

 

thanks

 

 

GLenn

[Duner440]

No, you dont want to use a 3 jaw puller. It could damage the flywheel. They make a puller that threads into the center of the flywheel. I know Jeff (FASTOYS) has them in stock. You might send him a PM. Or you could visit his website. I have a link at the bottom of my signature. Here is a link to a picture of the tool you need. http://www.farmandsandtoys.com/partdetail.asp?partid=71

[moneybags]

Do NOT use a 3 jaw puller. Unless you want to buy a new flywheel. You need a flywheel puller to do it right.

They only coast like $12 bucks.

 

Jeff at Rast Racing has them.

 

link is on top of the page.

[liquedfire]

ok kool i see the threads on the flywheel now :biggrin:

 

 

 

 

 

im gonna order one of the pullers

 

 

btw what is a good timing setting for the timeing?? i do mostly woods riding

 

 

 

thanks for the help

[Screaming Yellow Zonker]

3 to 4 degrees of timing for standard trail riding.

[Tuaca]

Puller and impact helped me greatly when I did mine last week

[fox_forma]

yeah if you have access to an impact gun it works wonders, takes a whole 3 seconds to pop the flywheel off if that long using the puller with it

[liquedfire]

i do my bro is a mechanic

 

 

 

should have the puller tommorw

 

and what do u mean 4 advanced or retartd

[theshee]

He means to advance the timing 4*

[gipperz]

ok kool i see the threads on the flywheel now :biggrin:

im gonna order one of the pullers

btw what is a good timing setting for the timeing?? i do mostly woods riding

thanks for the help

Plus 4 is the norm, could use more for more low end but you better make sure it will not detonate. Might need to mix half race fuel and half premium. Be careful .