ban1 Posted March 31, 2007 Report Posted March 31, 2007 HAVE AN 01 SHEE WITH VITOS SUPER STOCK PISTONS,CARBON FIBER REEDS,COOLHEAD WITH SUPOSEDLEY 18CC DOMES. (HAS 130LBS OF COMPRESSION ON BOTH CYLNDRS) AND BILLS PIPES. JUST GOT NEW 28MM MAKUNI FLAT SLIDES NOT SURE WHAT JETS TO RUN. IM AT 2500 FT AND TEMPS AROUND 65 TO 85.WAS RUNNING 34MM FLAT SLIDES BUT COULDNT GET RID OF BAD BOG. NOT SURE WHAT JETS ARE IN NEW CARB YET JUST GOT EM AND HAVENT HAD TIME TO LOOK YET ANY HELP WOULD BE GREAT THANKS. Quote
fastrthnu Posted March 31, 2007 Report Posted March 31, 2007 Dont type in caps, caps are bad m`kay. You gt 130 psi with 18cc domes? Quote
mpbanshee Posted March 31, 2007 Report Posted March 31, 2007 With the mods you have listed, I would say stock jetting will be pretty close. 200 mains, 25 pilot, and needle clip in center groove. Quote
ban1 Posted April 1, 2007 Author Report Posted April 1, 2007 just checked jets in carbs mains are 180 pilots are 51. havent had head off just going by what old owner told me about domes,i thought 130 compresion was low for 18cc domes but not sure what size they are Quote
ban1 Posted April 1, 2007 Author Report Posted April 1, 2007 just checked jets in carbs mains are 180 pilots are 51.havent had head off just going by what old owner told me about domes,i thought 130 compresion was low for 18cc domes but not sure what size they are Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.