paulnyw Posted February 17, 2007 Report Posted February 17, 2007 hey i am rebuilding my banshee and want to know what kind of jetting to start with i have these mods .80 over with mx port ,pro lite pistons, fmf fatty, stock carbs no tors and individual filters , stock uncut head probably going to bump the timing plus 4 Quote
fastrthnu Posted February 17, 2007 Report Posted February 17, 2007 hey i am rebuilding my banshee and want to know what kind of jetting to start with i have these mods .80 over with mx port ,pro lite pistons, fmf fatty, stock carbs no tors and individual filters , stock uncut head probably going to bump the timing plus 4 what alt n temp? Quote
paulnyw Posted February 17, 2007 Author Report Posted February 17, 2007 hey i live in new york about an hour north of nyc and i will run it mainly spring throug fall so between 60-90 degrees Quote
dajogejr Posted February 17, 2007 Report Posted February 17, 2007 340 mains, 30 pilots, middle clip. Might have to go down to a 27.5 pilot ...depending on how much fuel that port job likes, fatties tend to like a real fat pilot. Quote
Banchetta Posted February 22, 2007 Report Posted February 22, 2007 300-320 mains, 27.5 pilot, needle 4th clip... Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.