BigRed350x Posted January 30, 2007 Report Share Posted January 30, 2007 OK, I'm going to be getting rid of all of the stuff off my 2006 banshee that I won't use on the buildup. Here's the stuff I'm getting rid of. Prices include shipping. All of these parts are off a 2006 banshee, off the show-room floor. I don't really track how many hours are on my bikes, but this one has less than 10, and more realisticly about 5 hrs on it. I bought it, did two heat cycles, and rode it around a buddies ranch for a couple hours and its been in my garage since then. Parts are practically brand new, and I won't use this stock stuff, so if you want anything that's listed, let me know. Again, prices include shipping. Stock Reeds $35 Stock Intake Boots w/ crossover tube $20 Stock Air-Box assembly, with boots for attaching to the carbs. $30 Stock Carbs w/ TORS and throttle cable. $40 Stock A-Arms, upper and lowers. $make offer Stock rear swingarm w/ carrier bearing $make offer Stock front bumper $make offer The top end (cylinders, head, pistons) is already sold. I'm not parting anything out on the rest of the engine. I also still have the following aftermarket parts laying around and would like to sell as well... Power Pro out-of-frame pipes w/ EGT sensor mounts, chrome w/ silencers $200 Trinity Stage IV pipes. $250 Quote Link to comment Share on other sites More sharing options...
Mullet Man Posted January 30, 2007 Report Share Posted January 30, 2007 trinity pipes, are they stainless by chance, if not, what coating? pics? stingers and silencers included? Quote Link to comment Share on other sites More sharing options...
BigRed350x Posted January 30, 2007 Author Report Share Posted January 30, 2007 (edited) trinity pipes, are they stainless by chance, if not, what coating? pics? stingers and silencers included? I can get ya pics if you want. I think they are chrome. Haven't looked at them in a while. Stingers /silencers come with them. The pipes have some blueing around the first 1/4 of the pipe. One pipe had the spring mount broke off, but I welded a new one on. There's a half-dime sized ding on the inside edge of one of the pipes, but can't be seen when mounted up. The silencers aren't in the best shape, I've done what I can to clean them up... I can get more pics if anyone wants. Edited January 30, 2007 by BigRed350x Quote Link to comment Share on other sites More sharing options...
theshee Posted January 30, 2007 Report Share Posted January 30, 2007 BUMP :thumbsup: Quote Link to comment Share on other sites More sharing options...
dajogejr Posted January 30, 2007 Report Share Posted January 30, 2007 Jared...you got them carbs sold? I'm working on a guy's bike by my house....and his carbs are pretty well stripped up/worn out... Let me know...I'd love to have a newer set to work on...one of his makes me real nervous trying to thread his TORS removal caps onto these things.... I'll PM him if you got 'em still.. Quote Link to comment Share on other sites More sharing options...
Banshee188 Posted January 30, 2007 Report Share Posted January 30, 2007 How much for the A-arms? I'll take them. Pics to Mattfoley188@aol.com Quote Link to comment Share on other sites More sharing options...
ellison445 Posted January 30, 2007 Report Share Posted January 30, 2007 Thats a good price for them trinity pipes.... Free bump :thumbsup: Quote Link to comment Share on other sites More sharing options...
lilmikey Posted January 31, 2007 Report Share Posted January 31, 2007 OK, I'm going to be getting rid of all of the stuff off my 2006 banshee that I won't use on the buildup. Here's the stuff I'm getting rid of. Prices include shipping. All of these parts are off a 2006 banshee, off the show-room floor. I don't really track how many hours are on my bikes, but this one has less than 10, and more realisticly about 5 hrs on it. I bought it, did two heat cycles, and rode it around a buddies ranch for a couple hours and its been in my garage since then. Parts are practically brand new, and I won't use this stock stuff, so if you want anything that's listed, let me know. Again, prices include shipping.Stock Reeds $35 Stock Intake Boots w/ crossover tube $20 Stock Air-Box assembly, with boots for attaching to the carbs. $30 Stock Carbs w/ TORS and throttle cable. $40 Stock A-Arms, upper and lowers. $make offer Stock rear swingarm w/ carrier bearing $make offer Stock front bumper $make offer The top end (cylinders, head, pistons) is already sold. I'm not parting anything out on the rest of the engine. I also still have the following aftermarket parts laying around and would like to sell as well... Power Pro out-of-frame pipes w/ EGT sensor mounts, chrome w/ silencers $200 Trinity Stage IV pipes. $250 if you still have these parts i will give you 125.00 for reeds,intakes with tube, airbox with boots,carbs w tors and front bumper. let me know. i have paypal thats 125.00 shipped to 92509 Quote Link to comment Share on other sites More sharing options...
BigRed350x Posted January 31, 2007 Author Report Share Posted January 31, 2007 How much for the A-arms? I'll take them. Pics to Mattfoley188@aol.com MAKE OFFER. :thumbsup: Quote Link to comment Share on other sites More sharing options...
BigRed350x Posted January 31, 2007 Author Report Share Posted January 31, 2007 if you still have these parts i will give you 125.00 for reeds,intakes with tube, airbox with boots,carbs w tors and front bumper. let me know. i have paypal thats 125.00 shipped to 92509 working with someone on carbs, everything else is still there... there's someone else in line above you for the airbox and intake boots. If that deal falls through you are next in line. Quote Link to comment Share on other sites More sharing options...
BigRed350x Posted January 31, 2007 Author Report Share Posted January 31, 2007 Reeds, Intakes w/ crossover tube, airbox w/ boots, carbs w/ TORS and front bumper SOLD! Still have power pro pipes and trinity pipes for sale, and front and rear suspension. rear swinger comes with carrier bearing! - Jared Quote Link to comment Share on other sites More sharing options...
'04limited Posted January 31, 2007 Report Share Posted January 31, 2007 how do those trinity pipes respond to porting i was thinkin about gettin some t5's but damn thats a good price on those trinitys. Quote Link to comment Share on other sites More sharing options...
BigRed350x Posted January 31, 2007 Author Report Share Posted January 31, 2007 (edited) how do those trinity pipes respond to porting i was thinkin about gettin some t5's but damn thats a good price on those trinitys. No idea, I never ran them... you might check the jetting forum and ask around in there. Do a search, I know a couple members run them... Edited January 31, 2007 by BigRed350x Quote Link to comment Share on other sites More sharing options...
dajogejr Posted January 31, 2007 Report Share Posted January 31, 2007 RNBRAD runs trinity's and swears by them. He has said they are comparable to T5s in curve, power...with probably a bit more.... See if he jumps in or PM him. Free bump... I haven't heard from Jim, J...so, if the carbs gotta go, they gotta go! Quote Link to comment Share on other sites More sharing options...
92 banshee Posted February 1, 2007 Report Share Posted February 1, 2007 how much for the front shocks? shipped to nor1g0 canada? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.