Time to rejet

[olmick]

im rebuilding my banshee and need a lil info, right now the jetting is

temps: 50-70

elevation 800+ft

mains 320

air screw 2 turns out

stock pilot

mods are pc pipes, milled head, +4 timing, and pods

 

but heres the new setup

mild woods port, air box with uni filter (no lid) either .20 or .40 over(will check tomorrow) and the other mods

so does anyone have a guess on what i should start out with a plug chop with?

[David Keith]

im rebuilding my banshee and need a lil info, right now the jetting is

temps: 50-70

elevation 800+ft

mains 320

air screw 2 turns out

stock pilot

mods are pc pipes, milled head, +4 timing, and pods

 

but heres the new setup

mild woods port, air box with uni filter (no lid) either .20 or .40 over(will check tomorrow) and the other mods

so does anyone have a guess on what i should start out with a plug chop with?

If the 320 jets are right already, then boring 0.020 or 0.040 inch over will not require a jet increase. If your air box lid was on but now it's removed, the metering needle clip needs to be moved down one or two notches to avoid hesitation.

[olmick]

I wasnt running an air box, but now im going to

also what about the port?