Devans Posted November 27, 2006 Report Posted November 27, 2006 Hey guys, ive done nothing but search to find unclear answers on what to do. I took my pro design teher off of my blaster and want to put it on the banshee. On the blaster i just used the two wires from the key switch, when i ripped the switch out of the banshee i found four wires, two black, and two red it looks like. What exactly do i need to do with these four wires to eliminate my key switch and install my tether? Quote
Bansh-eman Posted November 27, 2006 Report Posted November 27, 2006 follow the 4 wires down to the plug on the plug there is 2 wires those are the 2 your looking for... Quote
Devans Posted November 27, 2006 Author Report Posted November 27, 2006 follow the 4 wires down to the plug on the plug there is 2 wires those are the 2 your looking for... what do i do with the other two wires? Quote
Bansh-eman Posted November 27, 2006 Report Posted November 27, 2006 cut the cap and splice the thether into there if thats the kind you got...all the tether is doing is completing the circut and when you pull the lanyard it breaks it thus killing the motor Quote
sheefreak Posted November 28, 2006 Report Posted November 28, 2006 If it is a normally open teather, use the two wires from the kill switch(I want to say black and black/white, been a while though, someone correct me if I am wrong). Have to splice the key switch wires together and leave them. The method banshe-man described is for a normally closed. Quote
Bansh-eman Posted November 28, 2006 Report Posted November 28, 2006 yeap, it depends what type of tether your using... Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.