sand rocket Posted November 27, 2006 Report Posted November 27, 2006 Found a nice set of mikuni carbs, but im not sure on how to tell what size they are. Anyone know the number on a 34 mm tm carb, and were to find the id #? What would the mesurments be on the manifold and filter openings? Quote
Bansh-eman Posted November 27, 2006 Report Posted November 27, 2006 no sure of any marking on the carb but you can get a set of micromitors and messure the motor side of the carb and thats the size of the carb... Quote
dajogejr Posted November 27, 2006 Report Posted November 27, 2006 I would bet if you call one or both of these companies, they could tell you..(don't bother emailing, they don't write back) www.sudco.com www.carbparts.com Quote
sand rocket Posted November 28, 2006 Author Report Posted November 28, 2006 these carbs have a 1.5 inch opening on the motor side. found some #s on them there t3402e. Quote
spike Posted November 28, 2006 Report Posted November 28, 2006 you will have to mesure in milimetres, and like banshee man was saying its the inside diametre of the motor side, but you wont need a micrometre for that, a ruler and a good set of eyes will do fine Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.