Workin on jetting this weekend

[okbeast]

I've got T-5's with K&N pods and the summer temps we ride at is probably 95 and the winter temps range from 40-70 (Oklahoma weather...). My elevation is around 1500 I believe. I'm runnin stock pilots, but I have some 27.5's that I think i'm going to swap in. My mains are some old 280's drilled out to around 320, and it runs great. I'm gonna do a plug chop 1st to check the mains. I'm not really sure where I should be on the air screw (never adjusted) and the needle tho.

[locogato11283]

i always ran 27.5 pilots with those kinda mods. i would just go up a main size or two and check the jetting. that should get you good for the temps.

[okbeast]

Sweet, well it's suppose to be 70 over Thanksgiving break so I'm not gonna rejet for that, but we're planning a LS trip over Christmas and it might be down in the 40's then I would guess. I would assume 1 size on the main would probably do good for that. I'll be sure the jetting is on now, but I assume it's close seeing as I have ridden it quite a bit and it runs hard and I haven't had any problems.