skykingcory Posted November 17, 2006 Report Posted November 17, 2006 I have a used Hot Rods stroker crank and I don't know the rod length or stroke. What is the best way to measure to figure it out?? Can you measure the cylinder spacer plates?? I figured the gasket thickness is figured into play on those so I didn't think that would be accurate. Quote
badassbanshee479 Posted November 17, 2006 Report Posted November 17, 2006 what is the number that is stamped on the side of the rod? real easy way to tell what you have as long as no one has messed with it. also I would use differnt pistons and get your domes cut before I would use a spacer plate! those things are knowen for air leaks. Quote
skykingcory Posted November 20, 2006 Author Report Posted November 20, 2006 what is the number that is stamped on the side of the rod? real easy way to tell what you have as long as no one has messed with it. also I would use differnt pistons and get your domes cut before I would use a spacer plate! those things are knowen for air leaks. The rods are C.K. 158 Hot Rods. That is what is stamped on the side. The spacer plates are 3 mm thick. I may not use the plates, just trying to figure out what I have first Quote
Animalman294 Posted November 20, 2006 Report Posted November 20, 2006 I agree about the spacer plate. Do it right for the peace of mind and the reliability factor........ :beer: Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.