Jump to content

Recommended Posts

Posted

OK did a search found nothing.I got a new set of stock carbs put them on and rode yesterday.It was good but not great poor throttle responce.Took the plastics and air box off to see if the carbs were syncronized and they were off.I just set them and noticed that the right one (when seated)opens quite a bit more than the left one.Also noticed I have a twist throttle when I try to adjust throttle up at the throttle only the right one moves.Throttle and cable is a new motion pro vortex.Is this normal,I would think they should move at the same time and when adjusted should also move at same time.Am I missing something.I need to here from someone who knows,Thanks.

Posted

you need them to raise up at the same rate. you will have to adjust to get pretty close

 

 

jeff sells a carb sync tool that works well also

Posted

The adjuster at the twist throttle is for taking out the majority of the slack. once that is done, all fine tuning is done with the adjusters on top of the carbs. You should have a little slack before they open, or else R's are gonna rise when you make a turn...

 

Do you have the idle screw kits installed?

 

Yeah, Jeff sells the syncrometer, as wes said....it is the bomb and foolproof to use!

Posted

The adjuster at the twist throttle is for taking out the majority of the slack. once that is done, all fine tuning is done with the adjusters on top of the carbs. You should have a little slack before they open, or else R's are gonna rise when you make a turn...

 

Do you have the idle screw kits installed?

 

Yeah, Jeff sells the syncrometer, as wes said....it is the bomb and foolproof to use!

Thanks guys,I completly forgot the adjustment on top of the carbs.Yes I have the idle screws and torrs is gone.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...