Fox73-Zz Posted November 1, 2006 Report Share Posted November 1, 2006 Well the time has come to part with my baby. 1 owner, 97 Banshee, Red on black Pics at http://www.geocities.com/fox73zz/quad.html If anybody wants something more specific just ask Mods: Engine: PSI ceramic coated pipes/silencer (mid-upper range) shaved stock head TDR reeds ported reed cage Dynojet needles installed (assortment of jets and stock needles included) stock carbs with TORS removed and idle adjusters installed K&N air filter with outerwares on alum adaptor plate lightened flywheel stock stator plate modded to +4 degrees clear flywheel cover relocated the overflow bottle clear radiator hoses alum. trans dipstick Frame: AC front bumper AC grab bar AC nerf bars (left is bent a little,see pic, think I rubbed a tree, been like that for so long don't remember) Ran all the wireing in the frame tubes relocated the electronics from the rear to behind the fuel tank/under the seat removed unneeded tabs from frame reinforced stress points on frame (rad loop, and rear subframe) HDPE (high density polyethelyne plastic) skid plate pro design kill switch renthal bars (purchased used, not sure of bend) key switch removed, hidden kill switch installed cut front fenders Suspension: -2 cut stock swingarm carrier has new bearings and installed zerk fittings main swingarm bolt has zerk fitting installed Ebrake block off Quicksand special a arms, +2+1, fully adjustable,red PC lower, Chrome uppers with thick rear tube (that is special) New upper heim joints, lowers still good though TCS dual rate, zero preload, comp adj, remote rezzie front shocks (set up for 230# mx) Red on black flame shock covers all around SS braided brake lines all around new bearings in front spindles with zerk fittings installed stock rear wheels with 20" turf tammers (lots of tread left) douglas red label wheels with groved rikken radials on front (wheels have sone nicks in lip, few bends, still ride very well) out of the 10 or so years I have owned the quad, it has sit for nearly 4 unused, so not a lot of wear. I will throw in a set of cut rear fenders to the buyer (if wanted) I will also throw in a twist throttle setup to the buyer (if wanted) I think it is worth $4000, but I don't know if it would bring that, so make me an offer I live in western kentucky (42088). I will ship at buyers expense, but prefer pickup. I can meet within 75 or so miles for free, over that, we would have to work something out. Got any questions, just ask. thanks. Fox73-zz Quote Link to comment Share on other sites More sharing options...
Fox73-Zz Posted November 2, 2006 Author Report Share Posted November 2, 2006 what do you guys think this bike is worth? 3500? or am I out in space here? Thanks Fox73-zz Quote Link to comment Share on other sites More sharing options...
Hoss's Banshee Posted November 3, 2006 Report Share Posted November 3, 2006 If you could come down on the price I think that we could work something out. I bought a 1998 all done up the other day for $1800, let me know if you can work on that price. Thanks for your time. Aaron Quote Link to comment Share on other sites More sharing options...
Fox73-Zz Posted November 7, 2006 Author Report Share Posted November 7, 2006 no offers? nobody interisted? Quote Link to comment Share on other sites More sharing options...
Fox73-Zz Posted November 12, 2006 Author Report Share Posted November 12, 2006 is 3000 obo more in the range? I can't believe nobody is interisted in this bike. If anybody has any questions or comments, let me know. Thanks Quote Link to comment Share on other sites More sharing options...
Bandit Posted November 12, 2006 Report Share Posted November 12, 2006 I was thinking 2300~2600...thats what they are going for around here...Ohio that is. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.