cbn70 Posted October 28, 2006 Report Posted October 28, 2006 If you are going to put a 4 mill stroker crank into your shee, do you need a spacer plate or are there pistons with wrist pins located 2mm lower? What are the combinations for the different stroker cranks htat are available?? Quote
odaen Posted October 28, 2006 Report Posted October 28, 2006 If you are going to put a 4 mill stroker crank into your shee, do you need a spacer plate or are there pistons with wrist pins located 2mm lower? What are the combinations for the different stroker cranks htat are available?? No matter which way you slice it, you'll either need a spacer plate or cut domes. You can buy a 4mm stock length rod, run stock banshee pistons, and a spacer or cut domes. You can buy a 4mm long rod, 795 series pistons with a spacer or cut domes. Quote
cbn70 Posted October 28, 2006 Author Report Posted October 28, 2006 I never knew that they will cut the head to make it all work. What is the best way to go? Or does it really matter? Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.