Thumper7999 Posted October 25, 2006 Report Posted October 25, 2006 Hi guys, I bought an '06 SE new 3 months ago, and have had some problems (mostly with the dealership :: ). I have solved all of them all except one, and I'm not letting the dealership near my machine again, so I'm hoping someone here can help me. Simple problem...when I'm just cruising (1/4 - 1/2 throttle) down the trail for 30 sec. or more and come to a stop, she idles high. If I give her a minute, it will come down, or I can rev it to get it to come down. If I'm riding hard before I stop, it idles fine. The machine runs great otherwise. I've been told to adjust the idle/air screw, but I honestly don't know which way to go or how far. There is also the possibility that the motor sucked in some dust, don't know if that could be the problem...the carbs have been cleaned well, but the problem stayed. Stock machine with a UNI filter, 1300 ft. altitude, needle on middle clip (3rd), 220 mains. Any help would be greatly appreciated. Quote
dajogejr Posted October 25, 2006 Report Posted October 25, 2006 One of two things...TORS are hanging up...or there's more dirt in them there carbs... Oh...and check to make sure there's a little slack in the cable at the thumb throttle... Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.