Banshee_19 Posted October 10, 2006 Report Posted October 10, 2006 I was out trail riding today and got a large log stuck between my A-arm and my tie rod tube bending my tube very bad. I was wondering if anyone has found an aftermarket one that is stronger than an OEM one. And also is there an automotive replacement tie rod end that will fit on a banshee? Quote
Bansh-eman Posted October 10, 2006 Report Posted October 10, 2006 you can go to almost every atv site and they sell them... just make sure you get the right length and not plus 2-3 if you got stockers... link do a shearch for tie rods and it will give you some options Quote
racer Posted October 10, 2006 Report Posted October 10, 2006 it wouldnt be hard to make a set out of any material you want. i made some tierods last weekend for something else and it was easy. granted they were aluminum, but the hardest part was keeping the bit dead straight by hand for a 1.5inch length. if you have a lathe, they could be done less than an hour from 304SS. Quote
my_rocz Posted October 10, 2006 Report Posted October 10, 2006 (edited) If you are worried about strength I would go with the Honda Style- they are solid Rod and the tie rod end screws on- I think Tusk makes the ones i have seen- I was going to go with them but I needed +2 so i used the ones that came with my arms- stronger than stock but not as strong as honda style- RMATV carries them Edited October 10, 2006 by my_rocz Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.