2004LEBanshee Posted October 5, 2006 Report Posted October 5, 2006 First off I need the number for jeff at FAST. going to call him about porting my cylinders for my stroker. Second, My shee started having a problem where when I pulled the clutch in reved it, it would inch forward. I changed to a tusk clutch it was still doing it but not as bad as it is now. So what could that be. Also with the new engine what should I run I have read about FAST clutch and may go that approach but does his plates still run stock components. Thanks again for the help. Quote
suzuki0702 Posted October 5, 2006 Report Posted October 5, 2006 your clutch is out of adjustment.....u have to split the cases...=) just kidding! adjust it in the cable ...if you cant get it out enough take the cover off.. Quote
Bansh-eman Posted October 6, 2006 Report Posted October 6, 2006 your not going to be able to takeup that much adjustment in the cable i dont think... your going to need to pull the cluch cover and adjust it there... jeffs number is 785-364-5325 Quote
2004LEBanshee Posted October 6, 2006 Author Report Posted October 6, 2006 well the case is apart will be putting in stroker soon. how about the fast clutch kit does it use factory hard ware. Quote
FASTOYS Posted October 6, 2006 Report Posted October 6, 2006 Click here http://www.bansheehq.com/forums/index.php?showuser=17548 Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.