banshee problems

[r/atvshee]

this one has me stumped :baseball_bat: ....its my dads banshee...it wont kick over but when we towed it, it ran perfectly fine. when it gets hot it would start without a problem. but after its cooled down it wont even kick over.....we've changed the sparkplugs on it and checked the wiring. everything is fine...could someone please help us out before this weekend because we have no idea of what can be wrong with it :shrug:

[Kickassfast1]

Hey

 

Mine did the same thing. I check the compression and found out that I needed a top end rebuild. I would check the compression 1st. You can buy a compression tester for $30.00 at an auto parts store. make sure you get the right size.

[Screaming Yellow Zonker]

it sounds like you aren't getting enough power while kicking. the stator sounds like its getting weak and when you pull start it your spinning the crank faster and making more current. I would check the volage output of your stator.

Good luck.

[okbeast]

I seem to have this problem somewhat also. I think my problem may be a jetting issue tho, too low of a pilot. I also have another stator on the way so maybe that'll help.